DTC B333: Loss Of Sir (DERM) Data: Description
DTC B333 will set if the ignition is on and the BCM is not able to exchange data with the DERM. If any other communication DTCs are stored along with B333. See DTC EO47, B333-B337: SERIAL DATA CIRCUIT MULTIPLE INTERMITTENT CODES . When this is the only communication code stored, the problem must be one of the following:
- An open CKT 800 between the BCM and DERM and a second open between the ECM and DERM.
- An open or short in the DERM power or ground in CKTs 1139 and 1003.
- A faulty DERM.
During the time the failure is present, no DERM Diagnostic information will be available for display. Also, while in the service diagnostic mode, this DTC will remain active, always checking for proper operation.