Lighting Chart A-9: DTC L208 With L205 Or L209 Addressing Problem: Description
Code L208 and L209 or L208 and L205 indicate a loss of power to an OSM address pin. When such an addressing failure exists on pin D of OSM No. 13, its address becomes the same as that of OSM No. 9. When an addressing failure exists on Pin C of OSM No. 13, its address becomes the same as that of OSM No. 5.
Therefore, when the BCM sends a command on the data line the correctly addressed OSM and the misaddressed OSM try to respond resulting in a lighting fault. When the BCM sends a command to the misaddressed OSM, there isn't an OSM available to respond resulting in a lighting fault. The LIGHTING CHART A-9: DTC L208 WITH L205 OR L209 ADDRESSING PROBLEM table lists the CCDIC messages and symptoms of these conditions.
LIGHTING CHART A-9: DTC L208 WITH L205 OR L209 ADDRESSING PROBLEM
| DTC Set | CCDIC Messages | Symptoms |
|---|---|---|
| L208 & L205 | Right Low Beam Out - Left Low Beam Out - Right Front Side Marker Out - Left Front Side Marker Out | Erratic Operation Of The Right Low Beam & Left Front Side Marker - Left Low Beam Inoperative - Right Front Side Marker Only Comes On With Hazard And Right Turn Functions |
| L208 & L209 | Right Front High Beam Out - Left Front High Beam Out - Front Park Lamps Out - Front Turn Signals Out - Fog Lamps Out | All Front Lamps Inoperative Except Side Markers - All Rear Lamps Ok - Right & Left Turn Signal & Hazard Indicators Do Not Flash |