Lighting Chart A-7: DTC L207 With L202 Or L204 Addressing Problem: Description
Because OSM No. 7 has three address pins, it is possible, however rare, for OSM No. 7 to lose power to two address pins and have the same address as either OSM No. 2 or OSM No. 4. When the BCM sends a command on the data line to OSM No. 2 or OSM No. 4.
If such an addressing failure exists, a lighting fault results because two OSM's are responding to one BCM command. Also, when the BCM sends a command on the data line to OSM No. 7, during such an addressing failure, a lighting fault results because there isn't an OSM available to respond to the command. The LIGHTING CHART A-7: DTC L207 WITH L202 OR L204 ADDRESSING PROBLEM table lists the CCDIC messages and symptoms of these conditions.
LIGHTING CHART A-7: DTC L207 WITH L202 OR L204 ADDRESSING PROBLEM
| DTC Set | CCDIC Message | Symptoms |
|---|---|---|
| L207 & L202 | Right Brake/Turn/Tail Lamps Out - Left Brake/Turn/Tail Lamps Out | Two Right & Left Rear Outer Lamps Out - Right & Left Turn Signal & Hazard Indicators Do Not Flash |
| L207 & L204 | Right Brake/Turn/Tail Lamps Out - Left Back-Up Lamp Out - Center Brake Lamp Out - License & Rear Side Marker Lamps Out | Two Left Rear Outer Lamps Out - Right Turn Signal & Hazard Indicators Do Not Flash |