Diagnostic Aids
Code 67 indicates that the set/coast or resume/acceleration switches were improperly set when Cruise Control was engaged. Whenever the condition which set Code 67 is present, the Cruise Control will not operate during that ignition cycle.
To diagnose the system perform the switch tests. If codes .7.6 or .7.7 set refer to the appropriate diagnostic chart. If codes .7.6 and .7.7 of the switch tests pass, then the DFI system is OK. Code 67 was caused by a failure in the set/coast or resume/acceleration circuits which was present when the cruise instrument panel switch was turned on.