Diagnostic Aids
NOTE:
If this code IS NOT displayed during the third pass of diagnostic codes, it is an intermittent failure and cannot be diagnosed using this procedure. For an intermittent code, refer to NOTE ON INTERMITTENTS.
Code 16 indicates that the generator output voltage is either above or below specification with the engine running. The ECM monitors the generator voltage indirectly by checking the voltage on the fuel pump feedback input (circuit 120).
- With the engine running, check the voltage on the fuel pump fuse. If the voltage is between 10.5 and 15.5 volts, then the ECM connector or ECM itself is at fault. If the voltage is less than 10.5 volts or greater than 15.5 volts with the engine running, then refer to generator diagnosis in Alternator article because the generator circuitry is operating improperly.