LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2017 >> Verano Base, Gas >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Cooling System >> Repair Instructions >> Transmission Fluid Cooler Inlet Pipe Replacement

Transmission Fluid Cooler Inlet Pipe Replacement

Fig 1: Identifying Transmission Fluid Cooler Inlet Hose
GM2004195Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the battery tray. Refer to Battery Tray Replacement .
1 Transmission Fluid Cooler Pipe Nut
CAUTION:

Refer to Fastener Caution .


Tighten 
22 N.m (16 lb ft)
2 Sealing Washer
Procedure 
DISCARD the sealing washer and use NEW only.
3 Transmission Fluid Cooler Inlet Hose

Procedure

  1. Disconnect the transmission line from the radiator and transmission. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
  2. Note the routing of the transmission line to ensure proper installation.
  3. Remove the transmission line from the clips securing the line to the transmission and fan shroud.
  4. Fill the transmission to a proper level with the correct fluid. Refer to Transmission Fluid Drain and Fill .