Installation Procedure
- Install the transmission fluid auxiliary cooler (2).
- Install the transmission fluid auxiliary cooler bypass valve bolt (5) and tighten to 4 N.m (35 lb in).
- Install the transmission fluid cooler intermediate pipe (4) and the fluid cooler outlet pipe (3) to the transmission fluid auxiliary cooler bypass valve. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
- Install the radiator air seal (1).
- Fill and check the transmission fluid level. Refer to Transmission Fluid Drain and Fill .
- Install the front bumper fascia center support. Refer to Front Bumper Fascia Center Support Replacement .
CAUTION:
Refer to Fastener Caution .