LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2012 >> Regal Base >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension Control System - Suspension Damping >> Repair Instructions >> Electronic Suspension Control Module Replacement

Electronic Suspension Control Module Replacement

Fig 1: Electronic Suspension Control Module
GM2018766Courtesy of GENERAL MOTORS COMPANY
Electronic Suspension Control Module Replacement

Callout Component Name
Preliminary Procedure 
Remove the left side luggage compartment trim. Refer to Rear Compartment Side Trim Panel Replacement (without HP6) , Rear Compartment Side Trim Panel Replacement (HP6, Left Side) , Rear Compartment Side Trim Panel Replacement (HP6, Right Side) .
1 Electronic Suspension Front Position Sensor Fastener (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
9 N.m(80 lb in)
2 Electronic Suspension Control Module Console
Procedure 
Remove the bracket from the control module. Slide the control module down from the bracket.
3 Electronic Suspension Control Module

Procedure

  1. Disconnect the connectors.
  2. For programming and setup information, refer to Control Module References .