LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2011 >> Lucerne CX >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Steering Linkage Outer Tie Rod Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Outer Tie Rod Assembly
    GM470663Courtesy of GENERAL MOTORS COMPANY
  1. Install the outer tie rod (3) to the inner tie rod (1). Do not tighten the jam nut (2).
  2. Fig 2: Installing Right Outer Tie Rod To Steering Knuckle
    GM470669Courtesy of GENERAL MOTORS COMPANY
  3. Install the outer tie rod (1) to the steering knuckle (2).
  4. Fig 3: View Of Tie Rod Seal
    GM470653Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  5. Install the outer tie rod lock nut (3).

    Tighten 

    Tighten the tie rod lock nut to 30 N.m (22 lb ft) plus an additional 180 degrees.

  6. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  7. Lower vehicle.
  8. Adjust the toe alignment. Refer to Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment .