Installation Procedure
- Install the power steering pump reservoir to the power steering pump. Refer to Power Steering Fluid Reservoir Replacement - Off Vehicle .
- Install the power steering pump pulley to the power steering pump. Refer to Power Steering Pump Pulley Replacement (L26) or Power Steering Pump Pulley Replacement (LS4) .
- Position the power steering pump to the engine.
- Install the power steering pump mounting bolts.
Tighten: Tighten the bolts to 25 N.m (18 lb ft).
- Connect the power steering pressure hose to the power steering pump. Refer to Power Steering Pressure Pipe/Hose Replacement (L26) or Power Steering Pressure Pipe/Hose Replacement (LS4) .
- Connect the power steering return hose to the power steering pump. Refer to Power Steering Cooler Pipe/Hose Replacement (L26) or Power Steering Cooler Pipe/Hose Replacement (LS4) .
- Install the harness connector (1) to the power steering pump (4).
- Install the accessory drive belt. Refer to Drive Belt Replacement (L26) .
- Fill the power steering system with fluid. Refer to Checking and Adding Power Steering Fluid .
- Bleed the power steering system. Refer to Power Steering System Bleeding .
- Operate the power steering system and inspect for power steering system leaks. Refer to Power Steering Fluid Leaks .
CAUTION:
Refer to Fastener Caution
.