LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Rendezvous CXL >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls & Fuel - 3.5L - Introduction (2 Of 2) >> Repair Instructions >> Powertrain Control Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Battery & PCM
    GM1544730Courtesy of GENERAL MOTORS CORP.
  1. Install the engine harness electrical connectors (4) to the PCM.
  2. Install the PCM (2) into the air cleaner assembly (3).
  3. Install the air cleaner assembly cover (1).
  4. NOTE: Refer to Fastener Notice .
  5. Install the air cleaner assembly cover screws.

    Tighten:  Tighten the screws to 4 N.m (35 lb in).

  6. Install the left diagonal brace. Refer to Front End Sheet Metal Diagonal Brace Replacement - Left Side .
  7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  8. If a NEW PCM was installed, program the PCM. Refer to Control Module References .