LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Rendezvous CXL >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Catalytic Converter Replacement >> Installation Procedure

Installation Procedure

  1. Install the HO2S. Refer to Heated Oxygen Sensor 2 Replacement .
  2. Fig 1: Catalytic Converter
    GM1645185Courtesy of GENERAL MOTORS CORP.
  3. Install the catalytic converter (1).
  4. Fig 2: Catalytic Converter To Muffler Bolts
    GM1645182Courtesy of GENERAL MOTORS CORP.
  5. Install a NEW catalytic converter to muffler gasket.
  6. NOTE: Refer to Fastener Notice .
  7. Install the catalytic converter to muffler bolts.

    Tighten:  Tighten the bolts to 45 N.m (33 lb ft).

  8. Fig 3: Exhaust Manifold Pipe Stud
    GM260064Courtesy of GENERAL MOTORS CORP.
  9. Install the catalytic converter to exhaust manifold nuts.

    Tighten:  Tighten the nut to 34 N.m (25 lb ft).

  10. Connect the HO2S electrical connector.
  11. Install the CPA retainer.
  12. Lower the vehicle.