Removal Procedure
Courtesy of GENERAL MOTORS CORP.
- Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
- Loosen the positive battery cable bolt at the battery.
- Remove the positive battery cable from the battery.
- Remove the junction block cover.
- Remove the positive battery cable to junction block nut.
- Remove the positive battery cable terminal from the junction block.
Courtesy of GENERAL MOTORS CORP.
- Reposition the positive battery cable terminal boot at the generator.
- Remove the positive battery cable terminal nut.
- Remove the positive battery cable terminal from the generator.
Courtesy of GENERAL MOTORS CORP.
- Remove the negative battery cable ground bolt from the radiator support.
- Separate the negative battery cable ground from the fog lamp harness ground.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
.
- Remove the lower radiator baffle. Refer to Radiator Air Baffle Assemblies and Deflectors
.
- Remove the battery cable from the clips (1) on the side rail and lower radiator support.
Courtesy of GENERAL MOTORS CORP.
- Remove the starter solenoid nut.
- Remove the positive battery cable terminal from the starter.
Courtesy of GENERAL MOTORS CORP.
- Remove the negative battery cable nut (3) from the transaxle stud.
- Remove the negative battery cable terminal (4) from the stud.
- Lower the vehicle.
- Remove the battery cable assembly from the vehicle.
- Place the cable assembly on a work bench.
- Cut the tape around the cable conduit.
- Open the conduit and remove the negative battery cable.