Installation Procedure
- Install a stationary window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
Courtesy of GENERAL MOTORS CORP.
- Connect the antenna lead located on the rear quarter window, if equipped.
- Connect the OnStar™ Connector located on the rear quarter window, if equipped.
- Install the upper quarter trim. Refer to Rear Quarter Upper Trim Panel Replacement
.
- Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
- Check the radio and the On-Star ™ system if equipped to verify reception.
- Close the liftgate window.