LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Rendezvous CXL >> Repair and Diagnosis >> Body & Frame >> Windows >> Fixed & MOVEABLE Window Systems >> Repair Instructions >> Liftgate Window Replacement >> Removal Procedure

Removal Procedure

    CAUTION: If a window is cracked but still intact, crisscross the window with masking tape in order to reduce the risk of damage or personal injury.
    IMPORTANT: Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  1. Remove the rear wiper motor. Refer to Wiper Motor Replacement - Rear .
  2. Remove the center light applique.
  3. Fig 1: Identifying Rear Liftgate Window Defogger Connectors
    GM379401Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the rear liftgate window defogger connectors from the right and the left sides.
  5. Tape off and protect the inner edges of the rear window defogger grid lines from the window removal tool.
  6. Fig 2: Separating Urethane Adhesive From Liftgate Window
    GM387090Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Keep the cutting edge of the tool against the window. Inspect the depth of the cutting blade before starting.
  7. Separate the urethane adhesive from the window:
    • Leave a base of urethane on the pinchweld flange.
    • The only suitable lubrication is clear water.
    • Use J 24402-A  , J 39032  or equivalent in order to remove the window. See Special Tools .
  8. Fig 3: View Of Liftgate Window & Opening
    GM768861Courtesy of GENERAL MOTORS CORP.
  9. With the aid of an assistant, remove the liftgate window from the liftgate.

    Place the liftgate window (2) face up on a soft protective cover.