Installation Procedure
- Install the lap retractor over the stud. Align the tab on the retractor with the notch in the seat frame.
- Install the lap retractor fastener.
Tighten: Tighten the fastener to 35 N.m (26 lb ft).
- Install the lap belt retractor cover.
- Install the shoulder belt retractor.
- Install the shoulder belt retractor fastener.
Tighten: Tighten the fasteners to 35 N.m (26 lb ft).
- Install the tower front trim cover fasteners (1).
- Install the seat back cover. Refer to Seat Back Cover and Pad Replacement - Front in Seats.
- Install the seat belt tower rear cover.
NOTE:
Refer to Fastener Notice in Cautions and Notices.