LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> LeSabre Custom, 4T65E/M15 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Introduction) - 3.8L (L36 And L67) >> Repair Instructions >> Mass Air Flow (MAF) Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Turn OFF the ignition.
  2. Remove the fuel injection sight shield. Refer to Fuel Injector Sight Shield Replacement (L36) .
  3. Fig 1: View Of MAF Sensor
    GM378168Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The mass airflow (MAF) sensor on this engine is attached to the throttle body assembly.
  4. Disconnect the MAF sensor electrical connector (8) from the MAF sensor (1).
  5. Remove the screws (9) that hold the MAF sensor to the throttle body.
  6. Remove the MAF sensor (1) from the throttle body.