LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> LeSabre Custom, 4T65E/M15 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Introduction) - 3.8L (L36 And L67) >> Repair Instructions >> Fuel Tank Replacement >> Removal Procedure

Removal Procedure

  1. Relieve the fuel system pressure. Refer to the Fuel Pressure Relief Procedure .
  2. Drain the fuel tank. Refer to Fuel Tank Draining Procedure .
  3. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  4. Fig 1: View of Wheel House Filler Pipe Opening Cover, Bolt, Ground Strap, Fuel Fill Hose, Fuel Fill Pipe, Sealing Ring, and Fuel Filler Cap
    GM891295Courtesy of GENERAL MOTORS CORP.
  5. Remove the wheel house filler pipe opening cover (5).
  6. Remove the bolt (7) from the ground strap (6)
  7. Disconnect the fuel fill hose (4) from the fuel fill pipe (3).
  8. Remove the rear suspension support assembly. Refer to Support Replacement in Rear Suspension.
  9. Fig 2: View Of Fuel Filter Quick Connections
    GM483018Courtesy of GENERAL MOTORS CORP.
  10. Disconnect the fuel feed pipe (4) and the fuel return pipe (1). Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  11. Fig 3: View Of EVAP Pipe To Canister
    GM104621Courtesy of GENERAL MOTORS CORP.
  12. Disconnect the evaporative emission (EVAP) pipe (2) from the EVAP canister.
  13. Fig 4: View of Fuel and EVAP Retainer
    GM684413Courtesy of GENERAL MOTORS CORP.
  14. Remove the fuel and EVAP retainer from the frame.
  15. Fig 5: View of Fuel Tank Electrical Harness
    GM684415Courtesy of GENERAL MOTORS CORP.
  16. Disconnect the fuel tank electrical connector.
  17. Disconnect the fuel tank electrical harness from the retainers.
  18. Fig 6: View of Fuel Tank Strap Bolts, Fuel Tank, and Fuel Tank Straps
    GM104646Courtesy of GENERAL MOTORS CORP.
  19. Remove the fuel tank strap bolts (4).
  20. Remove the fuel tank (5).