LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> LeSabre Custom, 4T65E/M15 >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 3.8L >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Oil Level Sensor and/or Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View of Engine Oil Level Sensor Electrical Connector
    GM535633Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Component Fastener Tightening Notice in Cautions and Notices.
  1. Install the engine oil level sensor into the oil pan.

    Tighten:  Tighten the engine oil level sensor to 20 N.m (15 lb ft).

  2. Connect the electrical connector (1) to the engine oil level sensor.
  3. Fill the engine oil. Refer to Engine Oil and Oil Filter Replacement .
  4. Inspect for oil leaks after engine start up.