LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2004 >> Century Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Motor Replacement (3.1L) >> Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  3. Remove the front lower air deflector panel. Refer to Radiator Air Baffle and Deflector Replacement - Lower in Engine Cooling.
  4. Remove the torque converter covers. Refer to Torque Converter Cover Replacement in Automatic Transaxle - 4T65 - E.
  5. Fig 1: Starter Motor & Components (3.1L)
    GM473052Courtesy of GENERAL MOTORS CORP.
  6. Remove the starter solenoid BAT terminal nut (8) and remove the positive battery cable (9) from the starter motor.
  7. Remove the starter solenoid S terminal nut (7) and remove the starter solenoid wire (6) from the starter motor.
  8. Fig 2: Starter & Bolts (3.1L)
    GM461901Courtesy of GENERAL MOTORS CORP.
  9. Remove the starter bolts (1,2) and the starter motor.