Hesitation, Sag Or Stumble: Sensor/System
Check the following items:
- Check the Heated Oxygen Sensors (HO2S). A HO2S should respond quickly to different throttle positions. If not, inspect the HO2S for silicone or other contaminants from fuel or use of improper RTV sealant. The sensors may have a White powdery coating. Silicone contamination causes a high but false HO2S signal voltage (rich exhaust indication). The Powertrain Control Module (PCM) will reduce the amount of fuel delivered to the engine, causing a severe driveability condition.
- Check the Throttle Position (TP) sensor and related wiring.
- Check the Mass Air Flow (MAF) sensor and related wiring.
- Check the Exhaust Gas Recirculation (EGR) system for proper operation. See EXHAUST GAS RECIRCULATION under EMISSION SYSTEMS & SUB-SYSTEMS in SYSTEM & COMPONENT TESTS - 3.8L BONNEVILLE, GRAND PRIX, IMPALA, LESABRE, MONTE CARLO, PARK AVENUE & REGAL article.