LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2001 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Interlock Systems >> Removal & Installation >> A/T Shift Lock Control Solenoid (Floor Shift) >> Installation

A/T Shift Lock Control Solenoid (Floor Shift): Installation

  1. Install the upper clip of the A/T shift lock control solenoid onto the upper pivot point, and the lower clip onto the lower pivot point. See Fig 2 .
  2. Install the floor console. See FLOOR CONSOLE  .
  3. Install the electrical connector to the A/T shift lock control solenoid. See Fig 1 .
  4. Connect the negative battery cable.
Fig 1: Locating A/T Shift Lock Control Solenoid Connector (Floor Shift)
G00074528Courtesy of GENERAL MOTORS CORP.
Fig 2: Locating A/T Shift Lock Control Solenoid Pivot Points (Floor Shift)
G00074529Courtesy of GENERAL MOTORS CORP.