LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2001 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Remote Keyless Entry Systems >> Trouble Shooting >> Preliminary Inspection

Preliminary Inspection

NOTE: Perform functional test of all transmitter functions. If transmitter does not operate or operate a function depressed, see SYMPTOM INDEX  table under SYMPTOM TESTS.

Verify customer complaint by operating system. Visually inspect for obvious signs of mechanical and electrical damage. Inspect for blown fuse. For fuse No. 20 (15-amp) location, refer to illustration. See Fig 1 . Inspect for loose or corroded connections, damaged wiring harnesses and/or switches. Check for a broken or partially broken wire inside insulation, which could cause system malfunction but prove good in a continuity/voltage check with system disconnected. Ensure any aftermarket electronic equipment is properly installed. If fault is found, repair as necessary. If no fault is found, perform self-diagnostics. See SELF-DIAGNOSTIC SYSTEM  .

Fig 1: Identifying Rear Fuse Block Fuses
G00060851Courtesy of GENERAL MOTORS CORP.