Door Systems Diagnostic System Check
- Connect scan tool to Data Link Connector (DLC). DLC is located on lower left side of instrument panel, near steering column. If scan tool powers up, go to next step. If scan tool does not power up, go to TEST A: SCAN TOOL DOES NOT POWER UP under SYSTEM TESTS.
- Turn ignition switch to RUN position. Using scan tool, attempt to establish communication with Driver's Door Module (DDM) and Powertrain Control Module (PCM). If scan tool communicates with both modules, go to next step. If scan tool does not communicate with both modules, go to TEST B: SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE under SYSTEM TESTS.
- Using scan tool, select DISPLAY DTCs function for DDM and PCM. If scan tool displays any DTCs, go to next step. If scan tool does not display any DTCs, repair concern by symptom. See appropriate article for malfunctioning system.
- If scan tool does not display DTCs U1161, U1162, U1163 or U1170 (Bonneville only), go to next step. If scan tool displays DTCs U1161, U1162, U1163 or U1170 (Bonneville only), perform appropriate test. See DIAGNOSTIC TROUBLE CODE DEFINITIONS .
- If scan tool does not display any DTCs beginning with "U", go to next step. If scan tool displays any DTCs beginning with "U", go to TEST B: SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE under SYSTEM TESTS.
- If scan tool does not display DTCs B1000, B1004, B1007 or B1009, go to next step. If scan tool displays DTCs B1000, B1004, B1007 or B1009, perform appropriate test. See DIAGNOSTIC TROUBLE CODE DEFINITIONS .
- If scan tool does not display DTC B1327, go to next step. If scan tool displays DTC B1327, perform appropriate test. See appropriate GENERATORS & REGULATORS article in STARTING & CHARGING SYSTEMS.
- If scan tool does not display DTC B0490, go to next step. If scan tool displays DTC B0490, perform appropriate test. See appropriate AUTOMATIC A/C-HEATER SYSTEMS article in AIR CONDITIONING & HEATING.
- If scan tool does not display DTCs B2757, B2762 or B2772, go to next step. If scan tool displays DTCs B2757, B2762 or B2772, perform appropriate test. See DIAGNOSTIC TROUBLE CODE DEFINITIONS .
- If scan tool displays any DTC beginning with "P", perform appropriate test. See DIAGNOSTIC TROUBLE CODE DEFINITIONS . If scan tool does not display any DTC beginning with "P", perform appropriate test. See DIAGNOSTIC TROUBLE CODE DEFINITIONS .