Anti-Lock Brake System Diagnostic System Check
- Connect scan tool to Data Link Connector (DLC). DLC is located on lower left side of instrument panel, near steering column. If scan tool powers up, go to next step. If scan tool does not power up, go to TEST A: SCAN TOOL DOES NOT POWER UP under SYSTEM TESTS.
- Turn ignition switch to RUN position. Using scan tool, attempt to establish communication with the Electronic Brake Control Module (EBCM), Heating, Ventilation and Air Conditioning (HVAC) module (if equipped), Instrument Panel Cluster (IPC), Instrument Panel Module (IPM) (if equipped) and Powertrain Control Module (PCM). If scan tool communicates with all modules, go to next step. If scan tool does not communicate with all modules, go to TEST B: SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE under SYSTEM TESTS.
- Using scan tool, select DISPLAY DTCs function for the EBCM, HVAC (if equipped), IPC, IPM (if equipped) and PCM. If scan tool displays any DTCs, go to next step. If scan tool does not display any DTCs, repair concern by symptom. See appropriate ANTI-LOCK article in BRAKES.
- If scan tool does not display any DTCs beginning with "U", go to next step. If scan tool displays any DTCs beginning with "U", go to TEST B: SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE under SYSTEM TESTS.
- If scan tool does not display DTCs B1000, B1004, B1007, B1009 or B1010, go to next step. If scan tool displays DTCs B1000, B1004, B1007, B1009 or B1010, perform appropriate test. See DIAGNOSTIC TROUBLE CODE DEFINITIONS .
- If scan tool displays DTCs B1327, B1513 or B1514, perform appropriate test. See appropriate GENERATORS & REGULATORS article in STARTING & CHARGING SYSTEMS. If scan tool does not display DTCs B1327, B1513 or B1514, perform appropriate test. See DIAGNOSTIC TROUBLE CODE DEFINITIONS .