LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2001 >> LeSabre Custom, 4T65E/MN3 >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Modules >> Diagnostic Tests >> DTC B1007: EEPROM Write Error >> Testing

DTC B1007: EEPROM Write Error: Testing

  1. If appropriate diagnostic system check for has been performed for system exhibiting symptom, go to next step. If appropriate diagnostic system check has not been performed for system exhibiting symptom, perform appropriate diagnostic system check. See BODY CONTROL SYSTEM DIAGNOSTIC SYSTEM CHECK  under SELF-DIAGNOSTIC SYSTEM.
  2. Connect scan tool to Data Link Connector (DLC). DLC is located on lower left side of instrument panel, near steering column. Turn ignition switch to RUN position. Retrieve DTCs. If DTC B1007 is retrieved as a current DTC, go to next step. If DTC B1007 is not retrieved as a current DTC, go to DIAGNOSTIC AIDS  .
  3. Replace appropriate module. See REMOVAL & INSTALLATION  . After replacement, go to next step.
  4. Using scan tool, clear DTCs. Operate vehicle within conditions for running DTC. See CODE ENABLE CRITERIA  . If DTC B1007 resets, go to step  2 . If DTC B1007 does not reset, system is okay.