LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2000 >> Regal GS >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> System Tests >> Test G: Fore/Aft Lumbar Support Inoperative

Test G: Fore/Aft Lumbar Support Inoperative

  1. Using test light connected to ground, backprobe lumbar adjuster switch harness connector terminal "D" (Gray/Black wire). See Figure . Press and hold lumbar adjuster switch to aft (in) position. If test light illuminates, go to next step. If test light does not illuminate, replace lumbar adjuster switch. See POWER SEAT SWITCHES  under REMOVAL & INSTALLATION. Recheck system operation.
  2. Using test light connected to ground, backprobe lumbar adjuster switch harness connector terminal "C" (Light Blue/White wire). See Figure . Press and hold lumbar adjuster switch to fore (out) position. If test light illuminates, go to next step. If test light does not illuminate, replace lumbar adjuster switch. See POWER SEAT SWITCHES  under REMOVAL & INSTALLATION. Recheck system operation.
  3. Using a test light connected to ground, backprobe fore/aft lumbar adjuster relay connector terminal "B" (Pink wire). See Figure . Press and hold lumbar adjuster switch to aft (in) position. If test light illuminates, go to next step. If test light does not illuminate, replace fore/aft lumbar support relay. See POWER LUMBAR ASSEMBLY  under REMOVAL & INSTALLATION. Recheck system operation.
  4. Using test light connected to ground, backprobe fore/aft lumbar adjuster relay harness connector terminal "E" (Dark Blue wire). See Figure . Press and hold lumbar adjuster switch to fore (out) position. If test light illuminates, go to next step. If test light does not illuminate, replace lumbar support relay. See POWER SEAT SWITCHES  under REMOVAL & INSTALLATION. Recheck system operation.
  5. Using a test light connected to ground, backprobe fore/aft lumbar adjuster motor connector terminal "A" (Pink/Black wire). Press and hold lumbar adjuster switch to aft (in) position. If test light illuminates, go to next step. If test light does not illuminate, replace fore/aft lumbar support motor. See POWER LUMBAR ASSEMBLY  under REMOVAL & INSTALLATION. Recheck system operation.
  6. Using a test light connected to ground, backprobe fore/aft lumbar adjuster motor connector terminal "B" (Dark Blue wire). Press and hold lumbar adjuster switch to fore (out) position. If test light illuminates, go to next step. If test light does not illuminate, replace fore/aft lumbar support motor. See POWER LUMBAR ASSEMBLY  under REMOVAL & INSTALLATION. Recheck system operation.