LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1995 >> Regal Limited >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Adjustments >> Camber Adjustment (Front)

Camber Adjustment (Front)

CAUTION: DO NOT  lift vehicle by suspension parts. DO NOT  overextend drive axles.
  1. Loosen 3 strut cover attaching nuts. Remove strut cover. Lift front of vehicle enough to allow strut attaching studs to clear mounting holes. Cover top of strut to keep metal shavings from damaging strut. Using Template (J-36892) as a guide, file the 3 holes as necessary to allow for camber adjustment. See Fig 1 .
  2. Paint all exposed surfaces with rust-preventive paint or primer. Lower front of vehicle while aligning studs into holes. Install, but DO NOT  tighten, 3 strut cover attaching nuts. Set camber to proper specification. See ALIGNMENT SPECIFICATIONS  . Tighten strut cover attaching nuts to specification. See TORQUE SPECIFICATIONS  .
Fig 1: Adjusting Front Camber ("W" Body)
G95H14636Courtesy of GENERAL MOTORS CORP.