LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1995 >> Regal Limited >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 3.8L >> ECM/Pcm Code Charts >> DTC P0125: Coolant Temp Sensor Closed Loop Temp Not Met >> Diagnostic Aids

Diagnostic Aids

A shifted (out-of-calibration) ECT sensor is indicated when Code P0125 is set. An intermittent may be caused by a poor connection, rubbed through wire insulation or a wire broken inside insulation. Check for:

Inspect PCM harness connectors for backed out terminals, improper mating, broken locks, improperly formed or damaged terminals, poor terminal to wire connection, and damaged harness.

If connections and harness check okay, monitor a DVOM connected between PCM terminals while moving related connectors and wiring harness. If failure is induced, voltage reading will change. This may assist in isolating location of malfunction.

Fig 1: Code P0125 Schematic (3.8L) Coolant Temperature Sensor Closed Loop Temperature Not Met
G95B13806
Fig 2: Code P0125 Flow Chart (3.8L) Coolant Temperature Sensor Closed Loop Temperature Not Met
G95J13812