LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1991 >> Reatta 2D Convertible >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnosis & Testing >> Pre-Diagnostic Inspection

Pre-Diagnostic Inspection

When checking potential ABS system faults, check the following before using diagnostic code charts.

  1. Check ABS, IGN 1-ISO and STOP/HAZ fuses.
  2. Check fusible links on positive junction block.
  3. Check that overvoltage relay, ABS 6-way connector and electronic brake control module connectors are properly seated.
  4. Ensure parking brake switch is functioning properly.
  5. Check that ground system is clean and tight.
NOTE: There are 2 grounds for the ABS system. One is located behind the right headlight. The other is located at left side of dash, near parking brake pedal.