Code 21, TPS Signal VOLATGE High: Notes
- This step checks to see if Code 21 is the result of a hard failure or an intermittent condition. A Code 21 will set if TPS reading is greater than 2.5 volts, engine speed is less than 1800 RPM, MAP reading is less than specification and all of the above conditions present for 2 seconds.
- This step simulates conditions for a Code 22. If the ECM recognizes the change of state, the ECM and circuits No. 416 and 417 are okay.
- This step isolates a faulty sensor, ECM, or an open circuit No. 452. If circuit No. 452 is open, there may also be a Code 15 stored.