LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1989 >> Skyhawk S/E, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Testing >> MULTIFUNCTION Control Lever

MULTIFUNCTION Control Lever

NOTE: Ensure wiring harness continuity has been checked prior to testing multifunction control lever.

Disconnect wiring harness from wiper motor. Note wiring harness terminal identification. See Fig 1 . Using digital voltmeter with ignition switch on, check voltage at proper terminals with multifunction control lever in specified locations. See Fig 1 . Replace multifunction control lever if defective.

Fig 1: Testing Multifunction Control Lever Operation
G109405Courtesy of GENERAL MOTORS CORP.