Replaced Seat Occupancy Sensor Mat Will Not Enable (65 22 10)
Publication date: 2011-06-17Reference number: 65 22 10
REPLACED SEAT OCCUPANCY SENSOR MAT WILL NOT ENABLE
TECHNICAL SERVICE BULLETIN
Reference Number(s): SI B65 22 10, Date of Issue:
June 2011
Superceded Bulletin(s): SI B65 22 10, Date of Issue:
October 2010
| BMW: | F01, F02 (7 Series); F07, F10 (5 Series) |
| GROUP: | Audio, Navigation, Monitors, Alarms, SRS |
NOTE:
This Service Information bulletin supersedes SI B65 22 10 dated October 2010.
SUBJECT
Replaced Seat Occupancy Sensor Mat Will Not Enable
SITUATION
After replacing a CIS (capacitive sensing passenger occupancy mat), the new mat will not enable when using ISTA/P. However, ISTA/P shows that the ACSM (Active Crash Safety Module) was coded correctly. The following faults are stored in the ACSM control module: 9309ED, 9309F4 and 930A23.
CAUSE
ACSM coding error
CORRECTION
For a workaround, submit a PuMA case with "CIS enabling" in the subject line.
The coding fix is expected to be included with the release of ISTA/P 2.43 in September 2011.
WARRANTY INFORMATION
For information only.