HELICOIL Plus Thread Repair Kit (04 07 06)
Publication date: 2015-01-01Reference number: 04 07 06
HELICOIL PLUS THREAD REPAIR KIT
TECHNICAL SERVICE BULLETIN
| BMW: | All; With the N52 Engine |
| GROUP: | Tools and Equipment |
This Service Information bulletin supersedes SI B04 07 06 dated March 2006.
SUBJECT
Helicoil Plus Thread Repair Kit
SITUATION
Distribution of the following tool through the Automatic Tool Shipment Program is complete. Additional tools may be purchased through your RDC.
Helicoil Plus Thread Repair Kit
P/N 81 43 0 402 559
Price = Refer to ATLAS
This special Helicoil plus thread repair kit has been developed to properly repair threads on the magnesium crankcase. Only this kit is to be used to perform repairs on the N52 magnesium crankcase threads. For proper identification, the inserts are colored blue like the aluminum bolts. For tool use, refer to Repair Manual section 11 0 610. For replacement Helicoil inserts, refer to ETK section 11_3742.
KIT CONTENTS
| Description | Quantity | Size | Length (mm) |
|---|---|---|---|
| HELICOIL | 10 | 12 | |
| HELICOIL | 10 | 15 | |
| HELICOIL | 10 | M8 | 16 |
| HELICOIL | 40 | M8 | 20 |
| HELICOIL | 5 | M8 | 24 |
| HELICOIL | 5 | M8 | 27 |
| HELICOIL | 5 | M9 | 25 |
| HELICOIL | 30 | M10 | 20 |
| HELICOIL | 15 | M12 | 30 |
| HELICOIL | 5 | M12 | 36 |
| Tapping drill | 1 | 6.3 | |
| Tapping drill | 1 | 8.4 | |
| Tapping drill | 1 | 9.4 | |
| Tapping drill | 1 | 10.5 | |
| Tapping drill | 1 | 12.5 | |
| Spiral fluted tap | 1 | M6 | |
| Spiral fluted tap | 1 | M8 | |
| Spiral fluted tap | 1 | M9 | |
| Spiral fluted tap | 1 | M10 | |
| Spiral fluted tap | 1 | M12 | |
| Installation mandrel with bit stop | 1 | M6 | |
| Installation mandrel with bit stop | 1 | M8 | |
| Installation mandrel with bit stop | 1 | M9 | |
| Installation mandrel with bit stop | 1 | M10 | |
| Installation mandrel with bit stop | 1 | M12 | |
| HELICOIL tang break-off tool | 1 | M6 | |
| HELICOIL tang break-off tool | 1 | M8 | |
| HELICOIL tang break-off tool | 1 | M9 | |
| HELICOIL tang break-off tool | 1 | M10 | |
| HELICOIL tang break-off tool | 1 | M12 |
SPECIAL TOOL WARRANTY INFORMATION
Terms of the Parts department Special Tool Warranty can be viewed and printed by following the path below:
- Go to TIS.
- Select "Tools and Equipment."
- Select "Special Tool Parts Warranty."