Various Glow Plug And Glow Plug Control Unit Faults Stored In DDE (13 12 10)
Publication date: 2011-01-04Reference number: 13 12 10
VARIOUS GLOW PLUG AND GLOW PLUG CONTROL UNIT FAULTS STORED IN DDE
TECHNICAL SERVICE BULLETIN
| BMW: | E90, E70 with M57Y engines |
| GROUP: | Fuel Systems |
SUBJECT
Various Glow Plug and Glow Plug Control Unit Faults Stored in DDE
SITUATION
The vehicle may exhibit a long crank or rough idle in colder ambient temperatures. The Service Engine Soon lamp is on.
One or more of the following faults can be stored in the DDE:
- 4A1F combustion preheating control unit output stage cylinder 1 faulty
- 4A2F combustion preheating control unit output stage cylinder 2 faulty
- 4A3F combustion preheating control unit output stage cylinder 3 faulty
- 4A4F combustion preheating control unit output stage cylinder 4 faulty
- 4A5F combustion preheating control unit output stage cylinder 5 faulty
- 4A6F combustion preheating control unit output stage cylinder 6 faulty
- 494A combustion preheating control unit, diagnostic feedback
CAUSE
Internal fault with the glow plug control unit
CORRECTION
If one or more of the above faults are stored, replace the glow plug control unit and all six glow plugs. Refer to Repair Instructions REP12 21 520 (glow plug control unit) and REP12 23 505 (glow plugs) for component replacement.
PARTS INFORMATION
| Part Number | Description | Quantity |
|---|---|---|
| 12 23 7 807 277 | Glow plug | 6 |
| 12 21 7 800 156 | Glow plug control unit | 1 |
WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle/SAV Limited Warranty, any applicable Federal, State or BMW Emissions Warranty or the Certified Pre-Owned Limited Warranty (only applies to CPO vehicles that are still within the CPO coverage period but beyond any Emissions Warranty).
Defect Code: 12 21 00 11 00
| Labor Operation: | Labor Allowance: | Description: |
|---|---|---|
| 00 00 006* | Refer to KSD | Perform vehicle test |
| 12 21 520 | Refer to KSD | Replace glow plug control unit |
| 12 23 505 | Refer to KSD | Replace all glow plugs |
*Main Work - Only one main labor operation (ending with 000-499) may appear on any claim or group of claims (warranty, maintenance or campaigns) that are generated from the same repair visit.
All other labor operations on the same line or other lines must be claimed using plus code labor operations (KSD2 labor operations that have a (+) prefix and the last three digits are 500 or a higher number).