LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2004 >> 330i Automatic >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel System - Repair Instructions >> Sensor For Control Unit >> 13 62 531 Replacing coolant temperature sensor (M52TU, M54)

13 62 531 Replacing coolant temperature sensor (M52TU, M54)

Turn off ignition.

Installation location: 

Coolant temperature sensor (1) is fitted below intake air manifold in cylinder head of cylinder 6.

Remove intake air manifold. See 11 61 050 REMOVING AND INSTALLING INTAKE AIR MANIFOLD (M54)

Fig 1: Removing Intake Air Manifold
G03123734Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Unscrew temperature sensor.

Installation: 

Tightening torque, refer to 13 62 2AZ in FUEL SYSTEM - TIGHTENING TORQUES - M54, S54 or FUEL SYSTEM - TIGHTENING TORQUES - M56 .

Check coolant level, top up coolant if necessary.

Fig 2: Disconnecting Plug Connection
G03123735Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: Read out fault memory of DME control unit.
Check stored fault messages.
Rectify faults.
Then clear fault memory.