Downhill-Driving Detection
The rule of thumb that the same gear should be used for descending a gradient as for ascending the same gradient still applies.
This ensures that the engine's braking effect is exploited. The driver does not have to depress the brake pedal as frequently. This represents a clear improvement in comfort and takes the strain off the service brake.
This is made possible by the implementation of a downhill-driving detection function in the form of software. The control unit identifies that the vehicle speed is increasing in spite of overrun conditions and infers a downhill-driving scenario.
The logic circuit in the control unit begins by preventing a shift to the gear one higher. Nevertheless, if the vehicle speed increases in such a way that braking is required, a downshift takes place automatically to the gear one lower. This procedure can be repeated as many times until 1st gear is engaged.
The required data for downhill-driving detection are engine load, vehicle speed, longitudinal acceleration and service-brake condition.