LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2000 >> 740i >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock - Traction Control >> Removal & Installation >> Hydraulic Unit >> Removal

Hydraulic Unit: Removal

  1. Turn off ignition. Remove negative battery cable.
  2. Draw brake fluid out of expansion tank with a suction bottle reserved for exclusive use with brake fluid.
  3. NOTE: Keep brake fluid out of cable connector.
  4. Unlock central connector (1) and pull off. Unfasten nut (2) and remove ground wire. See Fig 1 .
  5. Before removing, mark brakelines for reassembly reference. Remove brakelines. Note location of diaphragm flow damper (1). See Fig 2 .
  6. Unfasten screw and remove hydraulic control unit. See Fig 3 .
Fig 1: Locating Central Connector
G00123184Courtesy of BMW OF NORTH AMERICA, INC.
Fig 2: Locating Brakelines At Hydraulic Control Unit
G00123185Courtesy of BMW OF NORTH AMERICA, INC.
Fig 3: Locating Hydraulic Control Unit Screw
G00123187Courtesy of BMW OF NORTH AMERICA, INC.