Drive Program Display
The drive programs are displayed in the instrument cluster, coded via the lines L6 (E), pin No. 10 and L7 (M), pin No. 12. The line L5 (S) is only evaluated by the EML control unit and not by the instrument cluster. See DRIVE PROGRAM DISPLAY table.
DRIVE PROGRAM DISPLAY
| Instrument Cluster | L6 (E) Pin 9 | L7 (M) Pin 12 |
|---|---|---|
| E | Low | High |
| M | High | Low |
| S | High | High |
| ..... | Low | Low |