LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2025 >> Q3 Premium >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Controls, Housing >> 37 Controls, Housing >> ATF Circuit >> ATF Cooler Adapter, Removing And Installing >> Removing

ATF Cooler Adapter, Removing And Installing: Removing

-- Remove The Air Filter Housing With The Air Duct Hose. Refer To AIR FILTER HOUSING, REMOVING AND INSTALLING (DSNA) , or AIR FILTER HOUSING, REMOVING AND INSTALLING (DSPA) .

-- Remove The Battery And Battery Tray. Refer To BATTERY .

-- Pry Out The Selector Lever Cable -1- From The Selector Lever -2-.

GWWN37-10583Courtesy of AUDI OF AMERICA, LLC

-- Remove The Bolts -5- From The Cable Bracket -4-. Do Not Remove The Lock Washer -3-.

-- Disengage The Gearshift Lever Cable -1- From The Clip -2-.

GWWN37-10584Courtesy of AUDI OF AMERICA, LLC

-- Remove The Clip -2- From The Adapter For The ATF Cooler.

-- Remove The Turbocharger Air Duct Pipe. Refer To CHARGE AIR SYSTEM (DNSA) , or CHARGE AIR SYSTEM (DSPA) .

-- Remove The Bolts -Arrows-.

GWWM37-10052Courtesy of AUDI OF AMERICA, LLC

-- Remove The ATF Cooler Adapter -1- Together With The O-Rings.

-- If The ATF Cooler Adapter Is Replaced, Install The Gearshift Lever Cable Clip -2- To The New Adapter.