Connected Gateway, Replacing Emergency Battery
NOTE:
The emergency battery is located under the Control Module for Emergency Call Module and Communication Unit -J949-.
Removal Procedures:
-- Remove the bench seat. Refer to REAR BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .
-- Fold the insulation mat for the seat component upward.
Removing :
-- Switch off the ignition and all electrical equipment.
-- Remove the bolts -arrows-.
-- Carefully turn over the control module with the holder.
-- Release catch -1- first, and then catch -2-.
-- Remove the emergency battery cover.
-- Release and disconnect the connector.
Installing :
Installation procedures occur in reverse order.