LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> SQ7 Premium Plus >> Repair and Diagnosis >> Body & Frame >> Windows >> Front Doors, Central Locking System >> 57 Front Doors, Central Locking System >> Door Components >> Mounting Bracket, Removing And Installing >> Removing

Mounting Bracket, Removing And Installing: Removing

CAUTION:

Risk of damaging the operating cable by deforming it.

- Never sharply bend or kink the operating cable.

Special tools and workshop equipment required 

Removing 

-- Move the door window into the "closed" position.

-- Remove the door inner cover. Refer to DOOR INNER COVER, REMOVING AND INSTALLING .

-- Remove the door handle. Refer to DOOR HANDLE, REMOVING AND INSTALLING .

-- Unclip the backing plates -1 and 2- for the door handle.

Fig 2: Identifying Exterior Door Handle Washer
GWWA57-10251Courtesy of AUDI OF AMERICA, LLC

-- Equipped on some models: disengage the wire on the mounting bracket -arrow-.

Fig 3: Electric Wire Spiral Clip, Bolt -3- & Mounting Bracket -2-
GWWA57-10321Courtesy of AUDI OF AMERICA, LLC

-- Free up the spiral clip -1- for the wire using the Pry Lever: 80 - 200  .

-- Remove the bolt -3-.

-- Disengage the mounting bracket -2- toward the rear and carefully to the opening for the door inner cover, at the same time pay attention to the operating cable.

-- Disengage the operating cable from the operating lever on the mounting bracket. Refer to EXTERIOR DOOR OPERATING CABLE, REMOVING AND INSTALLING .