LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2019 >> S5 Sportback Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Instruments) >> 90 Instruments >> Instrument Cluster >> Windshield Projection Head Up Display Control Module -J898-, REMOVING AND INSTALLING >> Windshield Projection Head Up Display Control Module -J898-, REMOVING AND INSTALLING >> Installing

Windshield Projection Head Up Display Control Module -J898-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2019 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

CAUTION:

There is a risk of destroying the windshield projection head up display control module.

- A control module that has fallen down cannot be used again.

- When inserting the control module, never apply pressure on the housing upper section.

-- Insert the Windshield Projection Head Up Display Control Module -J898- and tighten the bolts.

-- Mount the windshield and secure it - do not bond it.

-- Turn on the ignition and check the Windshield Projection Head Up Display Control Module -J898- function.

-- Calibrate the Windshield Projection Head Up Display Control Module -J898-. Refer to Windshield Projection Head Up Display Control Module -J898-, CALIBRATING .