LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2013 >> S6 >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass & Window Regulators >> 64 Glass, Window Regulators >> Windshield >> Overview - Windshield >> Replacing Gap Cover

Replacing Gap Cover

Fig 1: Replacing Gap Cover
GWWA64-10414Courtesy of AUDI OF AMERICA, LLC
  1. Windshield
    • Removed
  2. Gap Cover

    -- Adhering, refer to Installing the Gap Cover .

    -- Before installing new gap cover, remove residue completely using a commercially available window scraper to avoid damaging ceramic screen printed area.

    -- Clean adhesion area with Cleaning SolutionD 009 401 04.

    -- Apply a mark on to interior of window using, for example, a soft pencil at a distance -a- = 8 mm from upper window edge.

    -- Prime adhesion surface with Glass/Paint PrimerD 009 200 02 up to marking applied earlier and let it air dry for at least 10 minutes.

    -- Press the gap cover onto the glass starting in the middle with the rear edge facing the primer end (pencil marking).

    -- Reinstall window.