LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2013 >> S6 >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass & Window Regulators >> 64 Glass, Window Regulators >> Flush-Bonded Windows >> Minimum Curing Times

Minimum Curing Times

WARNING:
  • For safety reasons, use only electrically non-conductive 2C-adhesive when installing windshield and rear window using the materials listed below.
  • The vehicle can only be used after the minimum curing time has elapsed.
Window type Vehicle Adhesive sealing material Minimum curing time in hours
Windshield With airbag 2K Window Adhesive KitD 004 660 M2 2
Rear Window   2K Window Adhesive KitD 004 660 M2 2
Side Windows   1K Window AdhesiveDH 009 100 03 3

Adhesive Sealant, Removing from Window 

Adhesive Remover D 002 000 10 is recommended as a cleaning solution. Follow all safety precautions.

WARNING:

When cleaning from vehicle interior out, the window just installed must not be pressed outward.

Paint Surfaces 

-- First, clean paint surfaces with a dry cloth. Remove residual adhesive with adhesive remover D 002 000 10.

Plastic Trim 

-- Let the adhesive sealant harden (approximately 1 hour) and then remove it.