LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2013 >> S6 >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass & Window Regulators >> 64 Glass, Window Regulators >> Bolted Windows >> Front Door Window, Removing And Installing

Front Door Window, Removing And Installing

Removing 

Fig 1: Identifying Front Door Window
GWWA57-10132Courtesy of AUDI OF AMERICA, LLC
  1. Door Window
    • The door cover and speakerare removed. (Refer to FRONT DOOR TRIM PANEL )

      -- To remove, release catches -arrow- from coupling plate -2- with a screwdriver and pull window -1- in window guide up slightly.

      -- Tilt the window forward and remove it upward from the door.

  2. Window Regulator
    • The window regulator remains installed inside the door.

Releasing the Door Window 

Fig 2: Identifying Door Window, Releasing
GWWA57-10138Courtesy of AUDI OF AMERICA, LLC

-- Lower the door window.

-- Using a screwdriver, press coupling plate -3- outward to release through cut-out in window guide -1- and hole in door window -2-.

-- Remove window upward from coupling plate.

-- Tilt the window forward and pull it straight upward and out of the window guide.

Door Window, Inserting 

Fig 3: Identifying Door Window, Inserting
GWWA57-10691Courtesy of AUDI OF AMERICA, LLC

-- Insert door window -1- diagonally toward front in door window guide.

-- Align window in front and rear window guides and slide it down.

-- Press window down into coupling plate.

-- This engages coupling plate in window.