LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> A7 >> Repair and Diagnosis >> Body & Frame >> Windows >> Front Doors & Central Locking System >> 57 Front Doors, Central Locking System >> Door Components >> Closing Assist Motor, Removing And Installing

Closing Assist Motor, Removing And Installing

Fig 1: Exploded View Of Door Handle And Door Lock, Closing Assist Motor
GWWA57-10630Courtesy of AUDI OF AMERICA, LLC
  1. Release Cable
  2. Driver Door Closing Assist Motor -V302-
    • Removing 

      -- Remove the door trim panel. .

      -- Disconnect the connector from the motor.

      -- Remove the bolts from the motor.

      -- Guide the release cable out of the cable winder.

    • Installation

      -- When installing, first insert the cable end into the cable winder.

      -- Place the cable 360° inside the groove in the cable winder.

      -- Install the cable -arrows- into the motor.

      -- Tighten the motor.

  3. Rubber Bushing
    • No replacement part
  4. Screw