LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> A8 Base >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Technical Service Bulletins >> Accessories Control Systems >> 96 Replaced Lane Assist Camera Control Unit Cannot Be Coded (GROUP 96, NO. 12-30)

96 Replaced Lane Assist Camera Control Unit Cannot Be Coded (GROUP 96, NO. 12-30)

Publication date: 2012-02-24
Reference number: GROUP 96, NO. 12-30
Supersedes refnos: 2028772

96 REPLACED LANE ASSIST CAMERA CONTROL UNIT CANNOT BE CODED

96 REPLACED LANE ASSIST CAMERA CONTROL UNIT CANNOT BE CODED

TECHNICAL SERVICE BULLETIN

Reference Number(s): GROUP 96, NO. 12-30 (2028772/1), Date of Issue:  February 24, 2012
AUDI: D4 A8, C7 A6/A7 2011 - 2012
GROUP: 96 - Lights - Interior, Air bag

Service Information

96 12 30 2028772/1 February 24, 2012

Model(s) Year VIN Range Vehicle-Specific Equipment
D4 A8 2011 - 2012 All Not Applicable
C7 A6/A7

Condition

After replacing the Lane assist camera control unit, the control unit cannot be coded via SVM spec/actual.

Technical Background

Some replacement electronic control units require an SVM code to code and/or parameterized when being replaced for service. This is the case with the Lane assist camera control unit for the C7 A6, A7, and D4 A8. The way to identify control units requiring SVM for installation is to look at the "REMARKS" section in EKTA for the part number (See Figure 1). If only the parts bulletin number is listed then the SVM code will be listed within this bulletin, which can be found on the ETKAinfo.com website. Often, this information can only be seen in EKTA when performing an FI Search (VIN specific search).

G07982698

Production Solution

Not applicable.

Service

When replacing the Lane assist camera control unit (J894) an SVM parameterization and coding must be performed using the provided SVM code. This SVM code does not provide any software updates to the control unit.

Model Old Software Part Number Old Software Version New Software Part Number New Software Version SVM Action Code
2012 C7 A6 & A7 4H0907217A * 4G0907217 * XCHG85A001
4H0907217B * 4G0907217 *
2011-2012 A8 4H0907217A * 4G0907217 *
4H0907217B * 4G0907217 *

Warranty

Claim Type:  Use applicable claim type. If vehicle is outside any warranty, this Technical Service Bulletin is informational only.
Service Number:  9638
Damage Code:  0040
Diagnostic Time:  GFF 0150 0000 Time stated on diagnostic protocol (Max 50 TU)
Road test prior to service procedure No allowance 0 TU
Road test after service procedure No allowance 0 TU
Technical diagnosis at dealer's discretion
(Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details)
Claim Comment:  As per TSB #2028772/1

All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual.  Claims are subject to review or audit by Audi Warranty.

Additional Information

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information.