LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> A6 Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Braking System >> 45 Anti-Lock Braking System >> Removal And Installation >> Brake Lamp Sensor >> Removing

Brake Lamp Sensor: Removing

-- Remove the driver side storage compartment. Refer to STORAGE COMPARTMENTS AND COVERS .

-- Disconnect the connector from the brake lamp sensor.

-- Press the plunger -arrow B- on the brake lamp sensor all the way in.

Fig 1: Brake Lamp Switch Location
GWWA45-10103Courtesy of AUDI OF AMERICA, LLC

-- Turn the colored piece on the brake lamp sensor, with the plunger still pushed in, all the way to the left in the -direction of arrow A- to release the sensor.

NOTE:

The plunger must remained pressed in when releasing the brake light sensor.

-- Let go of the plunger.

-- Insert the Release Tool for Brake Light SwitchT40168 between the brake light sensor plunger and the brake pedal.

The cone on the tool must face in the direction of the driver seat. The opening on the tool must align with the bulge on the brake light sensor.

-- Press the Release Tool for Brake Light SwitchT40168 against the brake lamp sensor. This releases the three retaining tabs on the brake lamp sensor.

-- Remove the brake lamp sensor from the mount -arrow C-.

Fig 2: Brake Lamp Switch Location
GWWA45-10103Courtesy of AUDI OF AMERICA, LLC