LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1995 >> 90 Base, 2.8 A, Standard >> Repair and Diagnosis >> Steering >> Steering Column >> Removal & Installation >> Combination Switch >> Removal & Installation

Removal & Installation

  1. Remove horn pad and steering wheel. See STEERING WHEEL & HORN PAD  . Remove telescopic lever. Loosen setscrew for tilt wheel lever. Remove upper shroud from steering column. See Fig 1 .
  2. Disconnect electrical connectors from combination switch. Insert a 5/32" (4 mm) Allen wrench through hole in bottom of lower shroud, and loosen combination switch clamp screw. Remove combination switch. To install, reverse removal procedure.
Fig 1: Removing Combination Switch
G93C82265Courtesy of AUDI OF AMERICA, INC.